Heat Recovery AHUs with Fixed Plate Heat Exchanger HEX These being our most popular models, wed like to offer a great versatility within. They are suited for almost everywhere, pre-eminently steamy and damp situations, like kitchens, changing rooms, pool rooms and saunas. Suitable for air volumes between 0,226 m3/s.
Industrial and commercial ventilation 01-2019 AIR HANDLING UNITS WITH HEAT RECOVERY Description The air handling units are the fully featured ventila-tion units with heat recovery for air filtration, fresh air supply and stale air extract. The extract air heat is used for warming up of the supply air stream in the high-efficient plate heat exchanger. Application & Design Energy Recovery Ventilation All Airxchange Energy Recovery Ventilation (ERV) components utilize a unique parallel plate energy transfer matrix design that optimizes the energy recovery surface area for a given diameter and depth of a rotary heat exchanger. In addition, a polymer film matrix offers ideal properties that limit counterproductive axial conduction of heat.
Holtop plate heat exchanger can be used in the air handling unit (AHU) as a main part of the heat recovery section, and the bypass can be built in when required. Installed in ducts It can also be installed in the ducts of ventilation system as a main part of the heat recovery section. Heat recovery AHU VENTS VUT/VUE WH EC - The VUT/VUE WH water heater at outlet from the heat exchanger is designed for warming up of supply air up to the set level if heat recovery is not enough to attain the set supply air temperature. The water heaters are designed for maximum operating pressure 1.0 MPa (10 bar) and maximum heat medium operating temperature +95 °C.
Hoval plate heat exchangers operate within the guidelines for heat recovery as recuperators with joint faces. The heat releasing and heat absorbing air streams pass along the joint face, through which the heat is directly transmitted. Supply and extract air must therefore be brought together and flow through the heat exchanger. Plate heat exchangers HovalHoval plate heat exchangers are air/air heat transmitters made of aluminium. They are used for energy recovery in air handling systems and process technology. The different sizes and plate spacings allow an optimisation of performance data for any application. A variety of accessories make the installation in air handling systems easier (bypass, recirculation bypass, control dampers, adapter for actuator).
Plate heat exchangers. Hoval plate heat exchangers are air/air heat exchangers made of aluminium. They are used for energy recovery in air handling systems and process technology. The different sizes and plate spacings allow an optimisation of performance data for any application. A variety of accessories make the installation in air handling systems easier (bypass, recirculation bypass, Product catalogue 2018 Air handling units(plate heat exchanger or rotation heat exchanger) 4 Mixing box with damper and factory-mounted actuators 5 R-410A with heat recovery system with galvanised condensate tray and drip protection 6 Supply air fan (with hinged door, opening, drive monitoring, mounted and cabled lighting and ON/OFF switch) Typical configurations for Daikin air handling units provide a versatile range of functions.
Features of ER paper plate heat exchanger . Model:HBT-W168/168 to HBT-W1600/1600 . Suitable airflow:300-60000 m3/h - Air to air crossflow heat exchanger - Ideal for residential and commercial application. - Sensible and latent heat recovery, efficiency up to 80% - Anti mould and anti flaming - Various size and optional length
Your email address will not be published.*